• Nouveau revendeur

     logo axess online 190x136

    Axess Online

    1 rue Mozart
    Espace du Parc
    26000 VALENCE

     
    Téléphone: 04 75 82 00 80

    www.axess-online.com

  •  

    Envoyez vos e-mailings marketing simplement depuis votre logiciel de messagerie habituel.

  •  
    Les mises à jour de MailFountain sont
    automatiques
    et gratuites
    pendant toute la vie du produit.
  • no limit - 100x30


    Avec la technologie No Limit de MailFountain, envoyez des photos, des plans, des vidéos, des gros fichiers depuis votre client mail.

     

    Lire la suite...

pfSense® 2.3

pfsensepetit

pfSense 2.3 : fonctionnalités et changements

 

Security/Errata

Several obsolete items were removed from this release. The items are noted again in the sections below, but worth emphasizing:

  • The PPTP VPN Server has been completely removed. The protocol has been broken for over three years. A longer explanation has been posted on the forum
    • The PPTP WAN client remains for use with ISPs still using PPTP.
  • Layer 7 classification support has been removed from the traffic shaper.
    • It was rarely used, had been broken for all of 2.2.x, had absurdly high CPU usage, and snort filters better/faster
  • WEP support has been removed from Wireless interfaces. #5123
    • No reason to still be using this in this day and age. If it is still needed, use external AP.
  • Single DES support has been removed from IPsec (3DES remains).
    • It should not be used, it is not secure.
  • 1GB NanoBSD images have been removed, as they were not large enough to proper accommodate the system and upgrade data. The supported sizes for NanoBSD images are now 2GB and 4GB.
  • The default system password hash has been changed to bcrypt. Current passwords will continue to work. Existing users need to reset their password to convert to the new hash. More info below under "Authentication". #4120
  • The LiveCD platform has been removed. The ISO is a bootable installer, as always, but it cannot run a live system.
    • The installer ISO image is now named "pfSense--RELEASE-.iso", with the .iso extension signifying the type of image it is (optical media installer).
    • For the very few people who were still using LiveCD, if the hardware can boot from USB, install to a USB thumb drive and run from it instead. If the options to keep /var and /tmp in RAM are active, and no packages are installed, the net result should be similar but ultimately more functional.

Dashboard/Widgets/GUI

  • Converted GUI to the Bootstrap framework, completely new look
  • Changed the GUI and Captive Portal web server to nginx; removed lighttpd. #5719
  • Cleaned up a lot of GUI code, option text, etc
  • TLS v1.0 disabled for the GUI. #5984
  • Removed old style themes, introduced new CSS-based themes
  • Refactored JavaScript and CSS, moved included items to more convenient locations
  • Added more AJAX updating in widgets and other places
  • Changed to more intuitive and modern icons and action buttons rather than the old confusing icon set (now using font-awesome icons)
  • Changed log display to be more consistent (single page for most logs, common filtering options)
  • Removed obsolete fifolog support. It was never used or fully implemented, and had no GUI option.
  • Improved notices in the GUI
  • Made breadcrumbs and page title handling more consistent
  • Added an option to have the top menu follows the user when scrolling
  • Renamed several GUI file names to match menu structure. #5628
  • Fixed AES-NI hardware display in the system information widget. #4911
  • Added widescreen support to the Dashboard. #5195
  • Improved password field handling security. Stored passwords are not presented back to the user in HTML. A masked value is returned instead. All password fields have also been changed to require confirmation.
  • Many pages have been reworked for improved internationalization
  • Changed info box functions, removed print_info_box_np, now print_info_box and print_apply_box are used to print appropriate boxes without problematic automatic detection
  • Moved RRD graphs to Status > Monitoring#5498
  • Changed RRD GUI interface to D3 rather than using the RRD graph command, so that a newer rrdtool base could be used with minimal added dependencies. #5498
  • Monitor IP added to gateways widget. #4782
  • Increased max_input_vars from 1000 to 5000 to accommodate larger aliases. #4780
  • Fixed NTP RRD graphs to accommodate negative values. #4423

OS/Backend

  • Moved to a FreeBSD 10.3-RELEASE base
  • Added tryforward() support to get (nearly all of) the performance of fastforward with IPsec enabled
  • Overhauled the build system
    • Eliminated the -tools repository
    • Removed Patches, changes are now applied a vendor branch of FreeBSD
    • Rewrote/changed the build scripts significantly
    • Moved the new build scripts to the main pfSense repository
  • PHP Upgraded to 5.6
  • Replaced pecl-APC with opcache. #4744
  • Added support for -c parameters to /etc/rc.initial. #4422
  • Added optional package for kernel debug symbols. #5330
  • Rewrote system_set_harddisk_standby() for the current CAM-based ATA stack. #4569
  • Fixed a Panic/Crash with "sbflush_internal: cc 4294967166 || mb 0 || mbcnt 0". #4689
  • Fixed a kernel panic with AES-NI. #4702
  • Updated AES-GCM/AES-NI bits from FreeBSD -HEAD. #4841
  • Removed zoneinfo.tgz file for Time Zones, move to the same format as FreeBSD. #4726
  • Fixed tcpdump with zerocopy enabled (net.bpf.zerocopy_enable=1). #5257
  • Added ability to disable PV disks and NICs on Xen. #5452
  • Removed the built-in but unused MySQL PHP modules and added them to the pkg server instead. They may be added as package dependencies or manually installed as needed.
  • Followed FreeBSD (r294560) in ceasing generation of rsa1 and dsa ssh server host keys by default
  • Removed support for nanobsd images < 2GB #5836
  • Overhauled IP address handling code in various parts of the system
  • scponly package is included by default. #5190
  • Shortened F1 boot prompt delay on nanobsd. #3426

Packages

  • The list of available packages in pfSense 2.3 has been significantly trimmed. We have removed packages that have been deprecated upstream, no longer have an active maintainer, or were never stable. A few have yet to be converted for Bootstrap and may return if converted. See the 2.3 Removed Packages list for details.
  • Removed use of PBI-based packages, moved to pkg(ng)
  • Fixed installation and handling of packages to use pkg, now works identically in the GUI and shell/console
  • Changed packages to use the FreeBSD ports format/layout to work with pkg
  • XMLRPC calls for package information and installation have been removed, replaced with native pkg functions. #4575
  • Added support for packages to be (re)built automatically by Poudriere
  • Added search capability to Available Packages list to filter packages by keywords. #5324
  • Fixed the version comparison code in the Package manager. #4924
  • Added support for tags in listtopic fields for use by packages
  • Factory reset now completely uninstalls packages. #5829
  • Improved handling of package install post-upgrade. #3597

System Updates

  • Major changes to update management
  • Removed "full update" or "full slice" upgrade for systems on 2.3 to later versions
    • These files will remain available for use by older versions updating to 2.3.
  • The "Full Backup" feature has been deprecated.
  • Changed system updates to be handled via pkg
  • Changed Base, kernel, and standard pre-installed binares to packages
  • Removed "Firmware" nomenclature, now only referred to as "Update"
  • Fixed updating of base to work the same from the console or the GUI
  • Added preliminary support for restarting system services without rebooting in cases when the base is updated but the kernel is the same.

Gateways/Routing

  • Replaced apinger with dpinger(!). #5624
    • This fixes many gateway monitoring related issues, including incorrect latency and loss in various edge cases.
    • Eliminates status file race conditions that caused update failures on services bound to gateway groups in some edge cases. #5180 and #3818 among others.
    • Fixed gateway monitoring startup at boot time with assigned OpenVPN interfaces. #4587
    • Check gateway monitor settings after upgrade, dpinger has different options than apinger.
  • Added code to allow gateways outside of an interface subnet. #972
  • Corrected "State Killing on Gateway Failure" description. #4709
  • Fixed disabling of a static route set to use a disabled gateway. #4813
  • Added standard deviation to gateway status and widget
  • Fixed dynamic gateway logic to prevent GIF/GRE from making dummy/unusable gateways that show up for monitoring/routing/etc #5766
  • Changed static routes handling for DNS servers so they are removed when a gateway is disabled #4921
  • Increased gateway weight limit from 5 to 30. #5843
  • Fixed issues with PPP type WANs and the Default Gateway Switching option. #1837
  • Fixed dynamic gateway handling for OpenVPN tap clients. #5981
  • Fixed display of full interface name in Diagnostics>Routes. #5484

Rules/NAT/pf

  • Added drag-and-drop rule reordering for firewall and NAT rules.
  • Fixed a situation where pf drops IPv6 packets with fragment header followed by a last fragment only. #2762
  • Fixed "LAN network" in v6 rules not working when a link-local address is assigned to LAN. #3656
  • Added reordering for 1:1 NAT rules. #3888
  • Improved handling of firewall rule tracker IDs for port forward associated rules
  • Added support for a separator bar in firewall and NAT rules for use as a visual reference. #5373
  • Standardized the NPt options in the GUI so their options and appearance are more similar to 1:1 NAT
  • Added a "no binat" checkbox to 1:1 NAT screen for exclusions. #3887
  • Limited pfsync syncpeer to IPv4 since it does not support IPv6 #4648
  • Changed the default CARP pass rules to use "no state" to avoid issues with broken L2 gear that duplicates packets #5800
  • Added sorting to Alias lists #4195
  • Added a hit counter to the firewall rule display with states and bandwidth consumed by packets matching rules.
  • Fixed issues with the DNS Forwarder and DNS Resolver being enabled concurrently (on different ports) in an HA environment #5882
  • Added a visual indication in the rule list for floating rules with the "quick" property set #5860
  • Improved state display on Diagnostics > States, now shows packets and bytes for each state
  • Fixed aliases containing both FQDNs and IPv6 subnets. #5872
  • Fixed removal of downloaded URL table alias contents when alias is deleted. #5856
  • Significantly improved validation of downloaded data for URL Table aliases. #5848
  • Fixed possibilities for creating an invalid ruleset with missing URL Table Ports aliases. #5845
  • Fixed filterdns issues with significant system clock time jumps. #4166
  • Added firewall rules hit counter. #3504

Interfaces/VIPs

  • Fixed pfSense_getall_interface_addresses truncating IPv6 link local IP addresses. #4062
  • Add GUI setting for VLANs PCP. #4133
  • Fixed GRE interfaces failing to have a RUNNING state after reboot. #4191
  • Fixed setting non-default MTUs in some edge cases. #4397
  • Added input validation on bridges to prevent adding the same interface to multiple bridges. #4595
  • Fixed CARP not working under bhyve. #4623
  • Improved input validation for 6RD, GRE and gif interfaces, helping prevent invalid configurations.
  • Changed input validation to allow /31 to be used for CARP VIPs since that is now supported and works in FreeBSD. #5533
  • Added debug logging option for DHCP6 client. #4534
  • Fixed cases where DHCP6 client (dhcp6c) was being launched multiple times in some circumstances. #5621
  • Upgraded dhcp6c. #5734
  • Upgraded DHCP client to ISC dhcpd 4.3.3P1.
  • Fixed applying of non-default MTU on gif interfaces post-boot with dynamic IP WANs. #5842
  • Added support for PPPoE with MTU/MRU > 1492, RFC 4638. #4542
  • Fixed issues with link cycling on some Intel 10G ix NICs #5913
  • Corrected ALTQ test to show that ix/ixgbe NICs are capable of traffic shaping. #5923
  • Improved handling of default interface assignment for some hardware. #4535
  • Corrected input validation for invalid IPv6 IPs with leading or trailing colon. #6024
  • Fixed orphaning of VLANs on lagg interfaces after editing the lagg. #6014
  • Fixed loss of some dhcpleases and dhcpleases6 logs. #5968
  • Fixed adding of routes immediately post-reboot for delegated IPv6 prefixes to sub-routers. #5957
  • Fixes to DHCPv6 leases status page and prefixes.php. #5944#4206
  • Fixed loss of IPv6 IP on track6 interfaces when saving and applying changes on that interface. #5945
  • Fixed incorrect interface mismatch prompt post-config restore when using VLANs on lagg. #5892
  • Added support for multiple span interfaces on bridges. #5871
  • Prevent naming conflicts between interfaces and interface groups. #5795
  • Prevent naming conflicts between interfaces and aliases. #5778
  • Fixed use of IP aliases with GRE tunnels. #4450
  • Fixed application of bridge advanced options after interface added to bridge. #4312
  • Set MTU back to default after clearing the field. #3926
  • Fixed IPv6 IP aliases on CARP IPs. #3716
  • Fixed IP alias on CARP IPs where IP alias above CARP parent in list. #3257
  • Fixed modifying unassigned VLAN interfaces changing assigned VLAN. #3209

Authentication

  • Fixed the WebGUI becoming slow or unusable when an LDAP server used for GUI auth is unreachable. #3383
  • Fixed a problem with using 'local' as the name of an authentication server 'Descriptive Name'. #4469
  • Fixed default Auth Server selection on system_usermanager_settings.php. #5440
  • Added support for bcrypt as a passwd hash and enabled it as the system default #4120
  • Replaced the default passwd hash for root/admin using bcrypt (blowfish).
    • Existing user passwords will continue to work in their existing format until the user's password is changed.
    • User passwords cannot be automatically converted as they are not stored plain text. To convert the password hash of an existing user to bcrypt, edit the user and change their password.
  • Added the ability to filter privileges when adding them to a user or group, to make finding them easier.
  • Fixed updating of group file for renamed groups. #6013
  • Fixed handling of groups with spaces in their names. Local group names can no longer contain spaces. New group scope option "Remote" added for LDAP and RADIUS use where spaces in group names are valid. #6012
  • Added support for RFC2307 style LDAP groups. #4923

Services

  • Fixed handling of the SNMP Bind Interface. #3883
  • Fixed ntpd crashes on 32 bit with dynamic WAN reconnections and OpenVPN client configured. #4155
  • Fixed a kernel panic with APU and SNMP with mibII. #4403
  • Updated igmpproxy to the latest version. #4672
    • The old version had some custom patches, so be wary of behavior changes
  • Added encoding for DHCP/DHCPv6 server additional BOOTP text options to preserve data when stored in XML #5623
  • Fixed duplication action for Load Balancer Monitor entries #4441
  • Upgraded DHCP Server and Relay to ISC dhcpd 4.3.3P1
  • Added statistics gathering for DHCP Server leases. #5387
  • Fixed DDNS key issues with DHCP and DHCPv6 Server enabled on multiple interfaces. #5603
  • Added custom ACLs for NTP (restrictions by network) #4463
  • Prevent starting of radvd in circumstances where it shouldn't. #5812
  • Added description column to DHCP leases status screen. #5729
  • inetd replaced with xinetd (used for proxy mode NAT reflection and TFTP proxy). #5707
  • DHCP lease counters added to Status>DHCP Leases. #5186
  • Allow configuration of RAs when DHCPv6 Relay is enabled. #6063
  • Fixed DHCPv6 Server's DDNS. #4675
  • DHCP Server menu item now defaults to the first interface with an enabled DHCP Server instance. #4647
  • Allow configuring DHCPv6 and RAs on track6 interfaces. #3029
  • Fixed RADIUS NAS IP in PPPoE server. #185
  • Deprecated ntpdate_sync_once.sh, replacing with ntpd -g. #6053

DNS

  • Fixed Unbound IPv6 link local handling. #4021
  • Added validation for advanced configuration directives in Unbound. #4411
  • Upgraded dnsmasq to 2.76.0test8 to fix crashes in 2.75. #5341
  • Fixed Unbound binding to IP alias virtual IPs. #5464
  • Changed Namecheap dynamic DNS to use separate hostname and domain name fields #4366
  • Added Multi-WAN support to RFC 2136 Dynamic DNS.
  • Added RFC 2136 support to the Dynamic DNS widget
  • Added input validation to prevent the same DNS server from being added multiple times on System > General#5915
  • Fixed CloudFlare dynamic DNS to not configure 'proxiable' and 'proxied' parameters. #6005
  • Fixed dnsmasq host overrides when both DNS Forwarder and Resolver are enabled. #5883
  • Added RFC 2136 dynamic DNS to dashboard widget. #5862
  • Added multi-WAN support to RFC 2136 dynamic DNS client. #5862
  • Don't specify 127.0.0.0/8 IPs as forward-addr in Unbound configuration. #5750
  • Added input validation to require configured DNS servers before enabling Resolver's forwarding mode. #4747
  • Added Google Domains DDNS support. #4322
  • Added DNS Made Easy DDNS support. #1258
  • Allow @ in Dynamic DNS hostnames. #3900
  • Improve IPv6 link local handling in DNS Resolver and Forwarder so it works across configuration restores and with HA config sync. #3802

IPsec

  • Upgraded to strongSwan 5.4.0.
  • Fixed multiple possibilities for IPsec status hangs. #5520
  • Revised handling of IPsec reloading when strongswan.conf is changed. #4353
  • Fixed problems with the search domain in IPsec mobile clients. #4418
  • Added support for elliptic curve for IPsec on webconfigurator. #4683
  • Added input validation for authentication backend when using EAP-RADIUS with IKEv2 Mobile IPsec. #5219
  • Fixed unit display on IPsec status pages for time and data to be more human-friendly. #5364
  • Removed support for single DES from IPsec #5543 (3DES Remains)
  • Removed global IPsec disable flag as it is no longer necessary. On upgrade, if the IPsec enable box was unchecked, all Phase 1 entries are disabled individually instead.
  • Changed IPsec 'up' commands to start in the backgound so they are non-blocking #5882
  • Disabled the strongSwan unity plugin by default, and improved the method used to disable the plugin #4178
  • Removed unnecessary and troublesome 'pass out' rules for mobile IPsec #5819
  • Fixed "no valid leases object found" log spam with IPsec dashboard widget. #5855
  • Fixed automatically added WAN rules (UDP 500, 4500, ESP) when using IPsec with IP aliases. #5500
  • Fixed IKEv2 to Cisco ASA resulting in traffic selector mismatch when initiated by traffic. #4719
  • Added "split connections" option to phase 1 for IKEv2 for interoperability with third party devices that do not support multiple traffic selectors on one child SA (Cisco ASA, others). #4704
  • Added dynamic AJAX update to status_ipsec.php. #6049

OpenVPN

  • Changed the default behavior of the OpenVPN server to use topology subnet, not net30. #5526
  • Changed Client-Specific Overrides so they can be set to apply to specific servers rather than being globally set. #5526
  • Fixed OpenVPN Server validation of self-signed certificates with a depth of 2. #4329
  • Fixed overwriting of custom /etc/dh-parameters.* on upgrade. #4816
  • Fixed invalid rules generated with some AVPair-defined ACLs. #5451
  • Improved display of server certificates on OpenVPN servers to help avoid users incorrectly picking user certificates for servers. #5602
  • Fixed OpenVPN client specification of auth-user-pass in shared key modes where it's not valid. #5941
  • Fixed problems with OpenVPN and some use of special characters in the username or password. #4605

MPD/PPP VPN/Services

  • Removed PPTP Server. #4226
  • Add MS-CHAPv2 option to L2TP Configuration. #4732
  • Fixed editing of multiple PPPoE connections with dial on demand enabled changing the port assignment. #4378
  • Added a user login count option to the PPPoE server

UPnP/NAT-PMP

  • Enabled port-in-use checking in miniupnpd. #4320
  • Enabled IPv6 for miniupnpd. #4321
  • Set secure_mode=yes in miniupnpd configuration #5627

Wireless

  • Removed WEP. #5123
  • Improved default settings for Wireless interfaces

Captive Portal

  • Fixed Captive Portal to support more than 120 VLAN interfaces. #4150
  • Added an option in Captive Portal for FreeRADIUS-friendly stop/start RADIUS accounting updates that solves problems with user session time limits. #2164
  • Fixed selection of RADIUS NAS IP with VIPs when editing Captive Portal zone. #5656

Traffic Shaping

  • Fixed CODELQ scheduler defaults. #4692
  • Removed Layer 7 classification support from the traffic shaper #5508
  • Relaxed the shaper wizard interface validation when there are no interfaces with gateways selected #4524
  • Fixed traffic shaper failure with "bandwidth for q... higher than interface" in some edge cases. #5721

Misc

  • Allow wildcards in Certificate Subject Alternative Names. #3733
  • Removed the "Certificate Authority" option on the Certificates tab of the Cert Manager when creating a Certificate. To make a Certificate Authority, use the CAs tab instead. #5924
  • Adapted gitsync to new repo structure. #4999
  • Changed the packet capture output in the GUI so that when the protocol is set for CARP, tcpdump interprets it as CARP for more accurate output
  • Added pfsync protocol option to packet capture page. #5866
  • Added "GoTo line #" control to Diagnostics > Edit File
  • Corrected help in pfSsh.php to properly reflect how recording works
  • Fixed validation of playback file passed to pfSsh.php #5657
  • Fixed disabling of filter.log logging where local logging is disabled. #6018
  • Updated included software on licenses.php page. #5903
  • Internationalization improvements. #5777
  • Fixed use of IP aliases on Test Port page. #5185
  • Fixed key map, screen map and font selection in installer. #4387
  • Prevent deletion of certificates in use by packages. #4142